No KYC · seven Linux VPS plans, one price in six cities · Pay in BTC, USDT, USDC, ETH, SOL, LTC, XMR
Language: English
Configure a VPS

Help center · access · checked 16 November 2026

How do I log in to a SaltVPS server over SSH?

Last updated: · 5 min read

Quick answer

How do I log in to a SaltVPS server over SSH?

Open the server under My servers in the SaltVPS dashboard and copy the SSH command, in the form ssh root@your-ip. With a key given at checkout, it logs in with that key only. Without one, use the temporary root password shown on the same page, then run passwd at once. The server has 1 IPv4 and an IPv6 /64.

In brief
  • User: root, on every SaltVPS image.
  • Where: the server page shows the SSH command, the IPv4 and the IPv6, each with a copy button.
  • With a key: only that key opens root; password login is off.
  • Without a key: a temporary root password, set by the team and shown in the dashboard.
  • First thing to do: change that password with passwd, or switch to a key.

How do you connect the first time?

  1. Wait for Running

    The server must show Running. While it shows Being created, the access details are not there yet.

  2. Copy the SSH command

    On the server page, the SSH command reads ssh root@ followed by the IPv4 address. Click the copy button.

  3. Open a terminal

    On Linux, macOS or Windows PowerShell, paste the command and press Enter.

  4. Accept the host key

    The first time, SSH asks to trust the server’s fingerprint. Type yes to continue.

  5. Authenticate

    With a key, SSH uses it on its own. Without one, paste the root password from the dashboard when asked.

  6. Change the temporary password

    Run passwd and type a new password twice. The dashboard password then stops working.

What does the server page show for each access type?

The SaltVPS server page adapts to the choice made at checkout: key or temporary password.

Access details on a SaltVPS server page, with an SSH key and with a temporary root password
ItemWith an SSH keyWithout a key
SSH commandShown, with a copy buttonShown, with a copy button
Userrootroot
Root passwordNone: password login is offTemporary, set by the team, hidden until shown
Note on the pageOnly your SSH key can log in; keep the private key safeChange it now: log in, run passwd, type a new password twice
Public keyShown under Resources and system, with a copy button—

How do you make an SSH key?

One command creates a key pair on Linux, macOS or Windows PowerShell; a second prints the public half. These are the commands the SaltVPS checkout shows:

  • ssh-keygen -t ed25519, then press Enter to accept the defaults.
  • cat ~/.ssh/id_ed25519.pub to print the public key.

Paste only the line from the .pub file. The file without .pub is the private key: keep it on your computer and never paste it anywhere. SaltVPS cannot recover a private key and never asks for it.

How do you switch from the password to a key?

Add your public key to root’s authorized keys, test it, then turn password login off. The server page gives the same advice:

  1. On the server, add the key line to /root/.ssh/authorized_keys.
  2. Open a second terminal and log in with the key, to be sure it works.
  3. Set PasswordAuthentication no in /etc/ssh/sshd_config.
  4. Restart the SSH service, for example systemctl restart ssh on Debian and Ubuntu, or systemctl restart sshd on AlmaLinux and Rocky Linux.

Keep the first session open until the test login works. A mistake in the SSH settings can lock you out, and then a reinstall is the way back.

What if SSH does not answer?

First check the status, then the address, then your own network.

  • Status Being created: the server is not ready yet; the deadline shows on the page.
  • Wrong address: copy the command again from the dashboard rather than typing it.
  • No answer right after a reboot or reinstall: a reboot takes the server offline for a minute or two; a reinstall shows Reinstall requested until the team has finished.
  • Permission denied with a key: SSH may be using another key. Point to yours with ssh -i ~/.ssh/id_ed25519 root@your-ip.

If none of this helps, see server not delivered or down.

Which systems can you log in to?

Six Linux images, all reached as root over SSH: Debian 13, Debian 12, Ubuntu 24.04 LTS, Ubuntu 22.04 LTS, AlmaLinux 10, Rocky Linux 10. According to SaltVPS's plan list, every plan from Grain (1 vCPU / 2 GB / 40 GB) to Dome (12 vCPU / 32 GB / 640 GB) offers the same images. Windows is not sold. Plans and prices are on the pricing page, and the order guide shows where the image is chosen.

SSH login questions

What is the username on a SaltVPS server?

root. The SSH command on the server page already includes it.

Can SaltVPS send me my root password by email?

No. The temporary root password is shown only on the server page in the dashboard. Once you change it with passwd, nobody on the team knows the new one.

I lost my private key. Can support recover it?

No. SaltVPS never holds private keys. Reinstall the server with a new public key; the reinstall erases the disk.

Can I log in over IPv6?

Yes. Each server has a routed IPv6 /64, shown on the server page; connect with ssh root@ followed by an address in it.

Is there a web console?

Only when the team gives one: a Control panel card then appears on the server page with its address and a temporary password. Otherwise, SSH is the way in.

Verdict
  • Copy the SSH command from the SaltVPS dashboard and log in as root; with a key, nothing else is needed.
  • With a temporary password, run passwd first, then move to a key and turn password login off.
Sources (1)
  1. OpenSSH manual pages (ssh, ssh-keygen, sshd_config) — OpenBSD project (2026-11-16)

Order a server with root over SSH

Add your public key at checkout and log in as soon as the server shows Running.

From $2.25/mo on 12 months · no KYC

Configure